|
Petroplas IP Co-axial Pipe • Underground |
Petroplas® Co-Axial Petroplas Pipe, IP Listed |
| Description |
Petroplas® Co-axial pipe is a proven Semi-Rigid fluorinated HDPE pipe system. It is the only pipe system to fluorinate the interior and exterior of both the primary and secondary pipes, thus providing unparalleled protection.
When used in conjunction with Frialen® electro fusion fuel fittings and a Friamat® electro fusion welder, it provides an Institute of Petroleum compliant fuel installation with a 30 year life span.
Petroplas® pipe is available in sizes from 1¼" to 30” nominal bore. Sizes up to and including 3” are available in 26ft sticks and 164ft coils (longer coils available with special order). Sizes 4” and larger are available in 20ft sticks only..
|
|
| Application |
|
- Service stations
- Marina’s
- Fuel Terminals
- Moist and marshy areas
- Pipelines
|
- Refineries
- Harbors
- Airports
- Non-Contaminated and Contaminated sites
|
|
|
 |
| Specifications |
| • Pipe Type : |
Fluorinated HDPE co-axial (Double wall pipe) with a 30 year design life and product warranty. Primary and secondary pipe come integrated on the coil, providing true containment. No ducting required. |
| • Connections |
Frialen electro fusion fittings, including couplers, elbows, tees, end caps and saddles |
| • Transitions : |
Plated Steel with NPT thread, electro fusable spigot end, fluorinated |
| • Interstitial space : |
Created with internal secondary stand off legs which are not attached to primary pipe |
| • Monitoring : |
Pressure, vacuum or liquid fill |
• Operating pressures:
• Primary:
• Secondary : |
150 psi (higher operating pressures to 325 psi available)
50 psi with EF test boots & 5 psi with rubber test boots |
• Test pressure :
• Primary :
• Secondary : |
150 psi or 1.5 times operating pressures
50 psi with EF test boots & 5 psi with rubber test boots |
| • Approved Fuel Types : |
All Petroleum Products (Motor Vehicle Fuels, High Blend Fuels, Concentrated Fuels, Aviation & Marine Fuels) |
| • Operating Temperatures |
-40oF (-40°C) to 140oF (60°C) |
|
| Installation |
| Installation, use, and maintenance of all Petroplas® products shall be in accordance with the manufacturer’s recommendations, State and county approvals. In event of conflicts, the stricter requirement shall govern. (IPP installation manual available directly from IPP, or at www.innovativepetroleum.com) |
| Certifications/Approvals |
| |
|
| Institute of Petroleum |
Cert # BC63/1010/98/001 And cert #BC63/0115/2000/001 |
| Shell International Procurement Certification |
Cert # BC63/1010/98/002 |
| State of Florida |
EQ 683 and EQ 617 |
| Derm Approval |
|
| DOT 192 and 195 |
On waiver letter per project |
| State of Michigan |
MUSTR – Rule 9, subsections 280.20 (b) |
|
Petroplas Coaxial Pipe Dimensions and Bend Radius |
|
Note : specifications subject to change without notice
MARCH 08 |
 Top of Page |
